|
High Visibility Reflective Trim – HV15 Fluorescent Lime-Yellow / Red-Orange
Technical Data Sheet (Click Here for PDF Version)
Description High Visibility Reflective Trims are composed of wide angle, exposed retroreflective lenses
bonded to 1 ½" textured polyester trim or approved equal. These retroreflective trims are designed to be sewn on to basic fabric materials such as cotton, polyester, and nylons. The product is available
in two fluorescent colors with a ½" silver stripe bonded and sewn in center. High visibility reflective trims are lightweight, flexible, durable, and abrasion resistant designed to enhance the nighttime
visibility of the wearer.
Reflective Brilliance Nighttime Visibility by Reflected Light: These reflective trims will appear brilliant
silver-white when viewed by a driver using vehicle headlights and remains highly reflective when viewed at entrance angles.
The coefficient of retroreflection (RA) is measured by retroreflective intensity testing procedures: ASTM
E809 and E810 (RA)
The following minimum RA values may be used for specification or purchase description purposes:
|
Entrance Angle
|
Observation Angle
|
Typical RA
|
Minimum RA
|
Daytime Color
|
Reflected Color
|
|
-4.0°
|
0.2°
|
500
|
330
|
Silver
|
White
|
|
Fluorescent Textured Polyester Trim Specification
|
Warp Yarn
|
150 denier textured polyester, 2 ply yarn
|
|
Filling Yarn
|
150 denier textured polyester, 2 ply yarn
|
|
Picks/Inch
|
20
|
|
Chromaticity
|
"x" incandescent light 0.61 average, daylight 0.58 average
|
|
"y" all light sources = greater than 0.35
|
|
Luminescence
|
"Y" all light sources = greater than 0.35
|
|
Weave
|
Grosgrain, PVA/Resin 235 finish, OMM-NX needle loom satin-tribond weave
|
|
Washability
|
Industrial wash and dry
|
|
Fastness
|
Minimum of a 4 rating AATCC test method 61 type 2A, 20 hours light fastness
|
|
|
|
|
Y
|
x
|
y
|
|
Fluorescent Lime-Yellow*
|
White plaque
|
109.41
|
0.3586
|
0.5186
|
|
Black plaque
|
107.38
|
0.3577
|
0.5178
|
|
Fluorescent Red-Orange*
|
White plaque
|
51.39
|
0.5547
|
0.3910
|
|
Black plaque
|
50.34
|
0.5521
|
0.3922
|
|
*Values based on single measurements
|
|
The fluorescent colors are especially conspicuous under daytime conditions and particularly at dawn and dusk.
|
|
Effective Performance Life
High visibility trims retain reflectivity for the normal use life of the garment to which they are applied. Performance can vary depending upon actual use,
exposure conditions, and maintenance. Users should test the trims to satisfy conformance to their own requirements. High visibility reflective trims are
resistant to contact temperatures from 500°F (260°C) to –19°F (-30°C).
Applications and Uses High visibility reflective graphic trims are designed for use on a variety of
fabrics to include:
-
Cotton
-
Poly Cotton blends
-
Fine to heavy Nylons
Some common uses are work wear shirts and pants; bag and pack
accessories; caps; outwear jackets, safety harnesses and vests.
While use of high visibility reflective trims enhances visibility, no reflective
material can guarantee absolute visibility, particularly in adverse weather conditions.
Care and Maintenance Instructions It is recommended that trims be tested when new materials or applications
are involved.
-
For best retention of brightness, machine home wash warm 105°F (40°C), tumble dry low.
-
Use cool iron, 300°F (150°C).
-
Dry clean, normal cycle.
-
Industrial washable.
Storage / Shelf Life
Note: Any substitution will void all express or implied warranties.
|